Road to AAPEX - The Blackwood’s Big Service Needs

Road to AAPEX – The Blackwood’s Big Service Needs

To get it safe before getting on the road, the team continues the Blackwood's required service procedures.

The automotive service story often takes longer to tell than you might anticipate. What seems like a routine job can spiral into an epic tale of root cause analysis. Once Babcox Media’s Joe Keene, an ASE-certified technician, and his team of Babcox techs, alongside Ohio Technical College professionals and students, began tending to the Lincoln Blackwood with some service TLC, they discovered its needs went beyond what we could cover in a single episode.

Like any good technician, we’re going above and beyond to bring you this extended episode, full of the nitty-gritty Blackwood service processes. A paint job, a brake system overhaul, an exhaust system setup, and gasket replacements—the Blackwood gets a makeover.

The process of painting the Blackwood is meticulous and involves several stages. This isn’t just about aesthetics. A flawless paint job can also help protect the vehicle from external damages. The Lincoln Blackwood boasts disc brakes on both ends, and the team is leaving no stone unturned to ensure they function at peak efficiency. The old exhaust system laid bare on the floor tells a tale of many miles traveled. In its place, a brand-new exhaust system with catalytic converters is installed.

Watch the video to witness the captivating transformation of the Blackwood in this extended episode of Road to AAPEX.

This episode of Road to AAPEX is presented by TRW Aftermarket.

You May Also Like

Mass Air Flow Sensor Cleaners

Andrew Markel talks air flow sensors in this video sponsored by Auto Value and Bumper to Bumper.

The theory and operation of any mass airflow sensor is pretty basic. What you have is a wire in the airstream entering the engine. It has current running through it. This current heats up the wire. As the air flows over this wire, it changes the resistance in the wire. The change in resistance shows the ECM, how much air is entering into the engine. But by heating up a wire that is in the Airstream entering the engine, even after the filter, it can have contaminants that can stick to that hot wire and cause faulty readings about the air entering into the engine. This can cause numerous codes because either it's under or over reporting the air entering the engine, and it's not very accurate. And using the oxygen sensor, the ECM can see issues with the mass airflow sensor. So what can you do both for maintenance and for service and diagnostics to confirm a mass airflow sensors functioning properly?

ADAS Calibrations: Limited Space Is Okay

ADAS work should be in play for almost everyone, regardless of space.

What Constitutes A Complete Brake Job?

Complete, safe brake jobs are key. This video is part of the Group Training Academy.

Decoding Brake Pull Issues

Solve brake pulls! This video is part of the Group Training Academy.

Understanding and Preventing Brake Noise

Silence noise with a complete brake job. This video is part of the Group Training Academy.

Other Posts

Gasoline Direct Injection Technology

GDI has been an key part of vehicles since the early 2000s. This video is sponsored by Standard.

Software Focus: Optimal Diagnostic Results

Improve scan tool operation and diagnostics. This video is sponsored by Bosch.

Clutch System Components

Clutch problems can occur at almost any mileage for a variety of reasons. This video is sponsored by The Group Training Academy.

Timing System Components

Boost timing system efficiency. This video is sponsored by The Group Training Academy.