Litens Pulleys: You’ll Be Surprised at What’s in the Box

Litens Pulleys: You’ll Be Surprised at What’s in the Box

What you get in the box may surprise you. This video is sponsored by Litens.

CC:

When trying to refresh the accessory drive belt system with a new belt tensioner and idler pulleys, the last thing you want to do is to reuse, worn or damaged parts. Litens understands your plight and makes the extra effort to include all the hardware with a tensioner or either pulley to complete the job.

Here are two examples that can make your life easier.

Here we have an either pulley with a shield between the pulley and bracket. The shield protects the bearings from heat, oil, and debris. The high underhood temperatures and corrosion constantly damage the original shield. Typically, the heat shield attaches itself to the old pulley. The tiny shield may appear inconsequential, but it protects the bearings.Without it, oil, moisture, and debris can come in contact with the bearings and seals. Litens includes this shield with the replacement, either pulley when many suppliers do not include this critical shield.

Here we have this pulley assembly. In the service information they tell you to replace the entire assembly. The problem is to replace the entire assembly. It takes about an hour and a half. We all know that the aluminum casing does not malfunction. It is the bearing and seals inside the pulley that go bad. The Liten solution is to replace just the pulleys. Inside this kit are the pulleys and the mounting hardware, so you don’t have to take the time to remove the aluminum casting from the front cover of the engine

For the technician, well, the job can be completed in less time. For part stores, The pulley kit takes up less space on the shelf. While these two examples are for specific applications, Litens takes the extra effort to include the hardware necessary to complete the job, with all of its products. It might be as simple as a new pivot bolt, to new innovations like the pin, or even including the tool required to remove an overrunning alternator to Cutler pull. What you get in the box may surprise you.

This video is sponsored by Litens

You May Also Like

Charging for Diagnostic Time

Charge for diagnostic time? Yes! This video is sponsored by Auto Value and Bumper to Bumper.

How many times has this happened to you: your customer drives up in a car with the check engine light illuminated. Naturally, as an experienced service advisor you ask about what the car is experiencing. The driver says, “I know it just needs an oxygen sensor – I have a buddy with a code scanner and that’s what comes up on the internet.” 

Lifecycle of Auto Parts: Are You Taking the Steps You Need?

Part 1: The Part Arrives, Time to Investigate Let’s start at the beginning of a part’s journey: the delivery. A part of your vehicle has failed–let’s say a fuel pump. After performing some research, you order the new pump, take it home, and open the box. Only for you to notice that there are pieces

A Closer Look: Electronic Throttle Bodies

A shop’s reputation is affected by things like accuracy of diagnosis, quality of the repair, and friendly service. Equally as important is the quality of the parts installed. If the shop does everything right, and the part fails, the customer will ultimately be upset with the shop. When a new part fails, the customer is

Advantages of a Pre-Assembled Knuckle Hub Assembly

Wheel bearings are a common repair, but they often present challenges during installation, taking additional time we don’t have to spare, and in some cases resulting in a comeback or quality that isn’t up to our standard. Generation 1 (press in) wheel bearings have always been the most difficult, and while Generation 3 (incorporated hub

Enhancing Efficiency and Streamlining Operations: The Benefits of Utilizing Nexpart Multi-Seller for Repair Centers

In today’s fast-paced automotive repair industry, staying ahead of the competition is crucial for repair centers to thrive. One key aspect that can significantly impact operational efficiency and customer satisfaction is the availability of OE, Aftermarket, Heavy Duty & Salvage parts. Here are just a few advantages of incorporating Nexpart Multi-Seller, a cutting-edge parts ecommerce

Other Posts

Understanding Stretch Shrink Belts

Stretch belts need shrinkage. This video is sponsored by Auto Value and Bumper to Bumper.

Mass Air Flow Sensor Cleaners

Andrew Markel talks air flow sensors in this video sponsored by Auto Value and Bumper to Bumper.

ADAS Calibrations: Limited Space Is Okay

ADAS work should be in play for almost everyone, regardless of space.

What Constitutes A Complete Brake Job?

Complete, safe brake jobs are key. This video is part of the Group Training Academy.