Collaborative Effort Between EPA, Brake Manufacturers And Motor Vehicle Industry Will Reduce Copper In Brake Pads -

Collaborative Effort Between EPA, Brake Manufacturers And Motor Vehicle Industry Will Reduce Copper In Brake Pads

Representatives of the U.S. Environmental Protection Agency (EPA), the Environmental Council of the States (ECOS) and motor vehicle industry associations have signed a Memorandum of Understanding (MOU) between the agency and the motor vehicle industry for the reduction of copper in brake pads. The MOU calls for the reduction of the use of copper in brake pads beginning in 2021 to levels less than 5 percent by weight and further reductions to 0.5 percent by the year 2025.

EPARepresentatives of the U.S. Environmental Protection Agency (EPA), the Environmental Council of the States (ECOS) and motor vehicle industry associations have signed a Memorandum of Understanding (MOU) between the agency and the motor vehicle industry for the reduction of copper in brake pads. The MOU calls for the reduction of the use of copper in brake pads beginning in 2021 to levels less than 5 percent by weight and further reductions to 0.5 percent by the year 2025.

The states of California and Washington initially enacted legislation to this effect. Proponents of the measure say it became clear that guidelines were needed at the national level to ensure consistency in reporting requirements and recognition of the industry’s compliance with those laws. Brake manufacturers have fully supported the efforts and have expended millions of dollars in the reformulation of their proprietary brake friction ingredients to ensure continued product quality and performance, motorists’ safety and reduced copper content.

A signing ceremony was Jan. 21 in Washington, D.C., in conjunction with the Society of Automotive Engineers International (SAE) 2015 Government/Industry Meeting. Participating in the MOU signing were Stan Meiburg, acting deputy assistant administrator of the EPA, signing for EPA Administrator Gina McCarthy; Robert J. Martineau Jr., ECOS president and commissioner of the Tennessee Department of Environment & Conservation; and designated signatories from the supporting industry trade associations.

“EPA is proud to partner with the automotive industry and the states to reduce the use of copper in motor vehicle brake pads, which means less of this material running off our roads and into our nation’s waterways,” said Meiburg. “The environment and public health in our country will benefit from this type of collaboration between the public and private sector.”

“ECOS is proud to be part of an agreement that will make a meaningful contribution to improved water quality across the nation,” said Martineau. “This effort shows how states, the federal government, and industries can work together to develop innovative, non-regulatory ways to reduce pollution.”

“This historic MOU will provide the motor vehicle industry with consistent copper reduction guidelines and eliminate the potential for disparate state regulations,” said Steve Handschuh, president and CEO of the Motor & Equipment Manufacturers Association (MEMA), one of the key industry associations involved with the effort. “This has been a proactive, collaborative effort by regulatory agencies, states, the automotive aftermarket and the motor vehicle industry to reduce copper in U.S. waterways.”

The motor vehicle industry associations that supported this effort and provided feedback on the MOU are:

• Alliance of Automobile Manufacturers
• Association of Global Automakers
• Auto Care Association
• Automotive Aftermarket Suppliers Association
• Brake Manufacturers Council
• Heavy Duty Manufacturers Association
• Motor & Equipment Manufacturers Association
• Truck and Engine Manufacturers Association

To learn more about the MOU and copper reduction in brake products, visit www.copperfreebrakes.org.

You May Also Like

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to your study plans.

The National Institute for Automotive Service Excellence (ASE) is reminding those preparing for ASE certification, or recertification, to consider taking the official practice tests as part of their test preparation process.

The official ASE practice tests cover the ASE automobile tests (A1 through A8), four medium/heavy truck tests (T2, T4, T6 and T8), automobile service consultant test (C1), automobile maintenance and light repair test (G1), automobile advanced engine performance specialist test (L1) and automobile parts specialist test (P2).

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Federated Upgrades Car Care Center Program

The program features new signage, marketing support and shop operations assistance.

DOJ, FTC Support MEMA Aftermarket Suppliers’ Petition

The petition expands consumer access to vehicle operational, diagnostic and telematics data.

Other Posts

Auto Care Association Launches REPAIR Act Videos

New resource emphasizes the need for federal REPAIR Act legislation.

Vehlo Acquires Shop Management Software, Shop-Ware

Shop-Ware is a cloud-based shop management platform for independent repair shops.

Karma Automotive Launches All-Electric Sedan

Distinctive styling, with unique chassis and drivetrain setup, add prestige.

Applications Open for Federated Car Care Scholarships

Completed applications due to AutomotiveScholarships.com by March 31.