Anti-Sway/Anti-Roll Bar Service

Anti-Sway/Anti-Roll Bar Service

Repair opportunities on active anti-sway bars are increasing. Sponsored by Auto Value and Bumper to Bumper.

Anti-sway bars (aka sway, stabilizer or anti-roll bars) never get the credit they deserve. If anti-sway bars were never invented, the ride and handling of vehicles would be a lot more harsh than it is today. That is because anti-sway bars act as a third spring controlling rolls stiffness of a vehicle. 

An anti-sway bar has no effect if both sides simultaneously move in the same direction. If one side is moved up or down, like a dip or bump, half of the rigidity is effected. If the two sides are moving in opposite directions, like when the body sways, the full rigidity of the anti-sway bar is effected. 

Cornering or lateral acceleration causes the chassis to roll. The faster the corner, the more the chassis will tend to roll. During a cornering maneuver, entire weight distribution of the vehicle changes. In a right hand corner, the most weight is placed on the left front wheel. The right rear wheel carries the least amount of weight. If the vehicle is breaking in the corner, even more weight is shifted the right front wheel. 

Imagine a car without anti-sway bars. The car would experience body roll around corners, but off-road and in a straight line, the tires would maintain better contact with rougher roads at lower speed for better traction. However, at higher speeds, the body movement around corners would negate this effect. If you increased the spring rate, it would reduce body roll but would impact ride comfort. 

Now, imagine a car with over-sized anti-sway bars and lower spring rates. The car would go great around corners with very little body movement. But, during braking, the rear-to-front weight transfer would cause nosedive and squat, making it painful to drive over rough or uneven pavement. 

The other consideration determining anti-sway bar diameter is the spring rates at all four corners. An engineer may want to improve the ride quality by reducing the spring rates, but this might mean a stiffer roll bar to meet stability requirements. There is a lot of give-and-take to make a vehicle that handles well but is still comfortable. 

The weakest points of any anti-sway bar system are the links that connect the bar to the suspension. Designs can vary from vertical links with bushings on both ends to full ball-and-socket joints. Both of these connections can wear over time and fail. Therefore, inspection is critical. 

The anti-sway bar can break at the ends or in the middle. This type of failure is more common on smaller diameter rear anti-sway bars. Also, pay attention to the mounting bushings that attach the bar to the frame. 

The repair opportunities on active anti-sway bars are increasing as vehicles age.  

This video is sponsored by Auto Value and Bumper to Bumper

You May Also Like

AMN Drivetime: Randy Breaux, GPC North America

At NAPA, “Breaux Knows” business relationships, ABCs to avoid and serving the automotive professional.

Growing up in South Louisiana, Randy Breaux started working young, inspired by his machinist father and grandfather. His formal career began after college, spending 26 years in manufacturing, with 21 of those at Baldor Electric Company. Following its acquisition by a European firm in 2011, he transitioned to the distribution side, joining Motion, a division of Genuine Parts Company.

Guide to Serpentine Belt and Drive System Maintenance

Properly maintaining the entire drive system prevents premature belt wear and system failure, ensuring customer satisfaction and vehicle reliability.

How Modern Car Sensors Optimize Performance and Emissions

Explore how modern cam and crank sensors are revolutionizing engine performance and emissions control.

Do EVs Require Special Brake Pads?

Proper brake pad selection is crucial for EVs to ensure consistent stopping power and long pad life.

Five Tips for your Next Wheel Bearing Job

These practical tips are designed to save you time and frustration, ensuring a smooth, noise-free outcome for your customers.

Other Posts
Auto Value and Bumper to Bumper Cruise Alaskan Coastline

More than 60 attendees experienced an all-inclusive VIP experience on the Royal Caribbean Ovation of the Seas cruise ship.

Do EVs Require Special Brake Pads?

Proper brake pad selection is crucial for EVs to ensure consistent stopping power and long pad life.

Educate Your Customers Utilizing AI

Discover how to generate quick, accurate explanations for repair orders and estimates, boosting your shop’s credibility and customer trust.

AAPEX: Navigating the Automotive Aftermarket’s Digital Evolution

The shift toward digital platforms has reshaped how businesses operate, from inventory management to customer interactions.