ADAS Calibrations: 2020 Ford F-150 Surround View Camera

ADAS Calibrations: 2020 Ford F-150 Surround View Camera

The step-by-step onscreen guidance of ADASLink eliminates guesswork. This video is sponsored by Hunter Engineering.

As with any ADAS calibration, notes Joe Keene, Hunter’s ADASLink diagnostic scan tool will lead the technician easily and logically through setting up and calibrating the surround view system for a 2020 Ford F-150. A static fixture isn’t necessary for this alignment procedure, because mats, a tape measure and a little tape are all that’s needed.

Joe demonstrates the need for accurately measuring rear tires and marking the locations for precisely placing the mats before finishing the calibration with a couple of simple touches on the ADASLink screen. “All set,” he says.

The step-by-step onscreen guidance of ADASLink eliminates guesswork and ensures a precise and thoroughly documented calibration for more than 25 million vehicles.

You May Also Like

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

For some emissions-related repairs like oxygen sensors and catalytic converters, a lot of time can be spent confirming the repair by trying to complete the vehicle emissions monitors. To complete or force a monitor requires driving the vehicle under specific conditions. The emissions drive cycle might include getting the vehicle to closed loop operation and performing four or five periods of accelerating from 30 to 45 miles an hour. Other manufacturers might require driving at freeway speeds. 

BEV Brake Service Tips

Andrew Markel shares EV service tips from the BendPak EV Garage.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.

PRT Heavy Duty Highlights Shocks for Commercial Vehicles

Learn to install PRT Heavy Duty’s gas-charged shocks for enhanced driving stability in trucks and buses.

Why You Should Replace The Thermostat

It is always best practice to replace the thermostat on a vehicle after it has overheated. Sponsored by Auto Value and Bumper to Bumper.

Other Posts

Interview: ADAS Calibration & Connectivity Drive Growth

Hunter’s Pete Liebetreu explains the company’s goals, equipment and outlook.

The Importance of Volunteering in the Aftermarket with Jon Owens

Owens shares industry experience and vision for AACF as its current president.

Tool Time Podcast: Clore Automotive

Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.

Tensioner Tech Assist

The Lift and Pin is designed to simplify tensioner replacement and belt installation.

tensioner