VIDEO: When Should A Sprocket Be Replaced

VIDEO: When Should A Sprocket Be Replaced?

Ignoring the fatigue life of the sprockets can limit the life of the whole system. This video is sponsored by Cloyes.

During a timing chain replacement, we’ve all been there.

You open up the timing chain kit and notice new sprockets in the kit. You may think that you could save a lot of time and money by not replacing the sprockets, but you’re opening yourself up to potential failure or reducing the longevity of the repair.

If you think that you can get away without replacing the sprockets, remember chains and sprockets are both engineered together mechanically and metallurgically. When a timing chain stretches and fatigues, the relationship between the pins and links changes. These small dimensional fitment changes result in a summation of stretch and impact how the chains engage with the sprockets. This can cause adverse tooth wear, which will not line up to replacement chain lacing or roller patterns.

By the time a customer comes to your shop with a P0016 or P0017 code for camshaft to crankshaft correlation, chances are the wear is already occurred to sprockets due to the stressed timing chain.

In addition, misfires can impact the condition of the chain and sprockets by inducing damaging harmonics. If the misfire is caused by a preignition event, the stresses on the sprockets and chains can be extreme. The cause of a misfire needs to be diagnosed either before or after the timing system is repaired. If the engine has suffered a catastrophic failure that has caused the engine to stop suddenly, damage has occurred. Therefore, the full system should be replaced.

In the event that a well-maintained clean engine needs timing system repair, the reuse of sprockets can be considered. But keep in mind the fatigue life of the system depends on the pairing of the fatigue life of each individual component. don’t let the fatigue life of the sprockets limit the repair longevity of the system as a whole.

Cloyes recommends that all components the timing system be replaced at the same time – this includes the sprockets that are included with most timing chain kits and VVT systems when necessary. For more information on your technical questions visit our tech center at Cloyes.com

This video is sponsored by Cloyes.

You May Also Like

Not All Coolants Are Equal – Or Appropriate

Engines have diverse cooling needs. This video is part of the Group Training Academy.

It may be hard to believe, but antifreeze has been around long before the automobile. In the mid-19th century, it was used in dynamite.  Early engine designers tried other means of cooling before antifreeze gained a foothold.  It came to prominence during World War I when it was used in tanks and vehicles to prevent them from freezing in the battlefield.

Tool Time Podcast: SATA USA

Learn about spray gun technology in this episode from TechShop.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

How Important is Regenerative Braking For EVs?

Regenerative braking helps to increase the range of an EV by up to 20%.

Other Posts

Return of the Rotary Engine

Mazda’s refined rotary engine has been resurrected and upgraded.

The Future of MEMA with Bill Long

MEMA looks to the future as it celebrates 120 years making a big impact.

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

BEV Brake Service Tips

Andrew Markel shares EV service tips from the BendPak EV Garage.