Tire Mounted Sensors: The Future of Intelligent Tires

Tire Mounted Sensors: The Future of Intelligent Tires

Tire-mounted sensors offer expanded capabilities for TPMS technology advancement.

Tire Pressure Monitoring Systems (TPMS) have come a long way since their original technology was introduced in the 1980s. At its inception, the system only went as far as turning on a warning light when tire pressure went outside of its recommended range. TPMS service was really limited to needing to stock dozens of different SKUs to offer coverage for all vehicle types equipped with TPMS.

Today, TPMS service can be covered using a single programmable sensor and the technology has advanced through wireless auto location displays, detecting temperature and pressure, using Bluetooth capabilities and mechanically fitting into more applications than ever before.

What is the next leap for TPMS?

For the technology to truly advance, the sensor must be able to detect more than just the air. Today, the sensor is most often connected to the inside of a valve mounted in the rim where it is suspended in the air inside of the tire, limiting its sensing capabilities to what it is exposed to… air. Increasing its capabilities is nearly impossible unless the sensor is mounted in a way that enables it to sense additional factors. By mounting the sensor to the inside wall of the tire, it is removing those limits and opens opportunities for new technologies to enter the mix.

A tire-mounted sensor is surrounded by a rubber sleeve which enables it to be glued to the inside wall of the tire. The tire is the only part of the vehicle that touches the road, so by adhering a sensor to the tire wall, the sensor can sense the road. Tire-mounted sensors will still detect tire pressure and temperature, but the new surface placement will allow it to also detect factors like vehicle load, road terrain and unique tire identification. These are capabilities that will continue to rise in importance as legislations continue to tighten on gas mileage and EVs continue to enter the market. The ability to give necessary data to optimize these areas is going to continuously increase in importance to the driver.

So what does all of this mean for repair?

Honestly, it’s a bit too soon to tell what the repair side of tire-mounted sensors looks like. Will the sensor be removable from the protective case and a new sensor easily replaced? Will the whole protective case be detachable? Will the sensor last the entire life of the tire with no repairs necessary/possible between tire purchases? Stay tuned.

There will likely be multiple types of tire-mounted sensors that enter the market that have various capabilities for repair. Staying on top of this trend and training at the shop level will be key to a shop’s ability to navigate this new technology and turn it into profit.

Jacki Lutz is the Global Head of Communications, Training and E-Commerce for Schrader TPMS Solutions, a global leader in TPMS. She is a TIA ATS instructor and serves on a variety of industry boards.

You May Also Like

Diagnostic Procedures For Stop/Start Systems

Stop/start technology is more than just a switch wired to the brake pedal and starter. Can your techs solve its problems?

When trying to resolve a complaint, code or no-start/no-crank condition on a stop/start vehicle, it is essential to know how the system operates. The problem may not have a complicated reason – something simple may be causing the stop/start system not to work.

The greatest obstacle to the advancement of stop/start technology is the driver’s and technician’s lack of trust in and knowledge of the technology. Many older drivers and technicians fear that stopping and starting the engine will cause a shorter life for the battery, starter and engine. But the real fear is that the engine will not start again at a green light. 

Tech Tips: Reading Calipers and Micrometers

Digital tools are great – but what happens if the battery goes dead? Here’s a reminder of how to read a micrometer.

Summer Air Needs To Be Filtered Too

Don’t overlook the importance of the cabin air filter in your customers’ vehicles.

Don’t Be Intimidated By ADAS Reflash Procedures

As a vehicle ages, the J2534 programming becomes even more important to the vehicle’s ADAS operation.

Complete Oil Changes Require The Right Filter

Think through the job, use the correct oil, filter and tools, and make sure you’re doing things in the right order.

Other Posts

World Record Driver Shows What’s Possible In An EV

Guinness World Record holder Rainer Zietlow explains the challenges of long-distance and extreme-temperature EV driving.

How AI Can Help Cameras Overcome Vehicle Vision Problems

Statistically, autonomous driving systems are already five times better than human drivers. AI will make them even smarter.

ETH Zurich Students Break EV Acceleration Record

The mythen electric race car from Academic Motorsports Club Zurich accelerated 0-62 mph in a record 0.956 seconds.

Tire Sales: In-Store, Online, or Both?

For many tire dealers, most profit percentage comes from online tire sales. Why do many dealers have brick and mortar?