Tips For Investing In A New Tire Changer

Tips For Investing In A New Tire Changer

An extremely busy tire shop that mounts 500 to 1,000 tires per month may get only a few years out of a tire changer.

Investing in equipment that allows a technician to mount a tire without damaging the tire or wheel can pay dividends for shops every day. 

Many OEM wheels can cost in excess of $1,000 each, and to repair them, your shop could fork out $500 for a simple scratch or gouge. If a shop can save itself just one wheel repair per month by having the correct tire changer, that more than pays for the new changer and keeps more revenue from each job in the business owner’s pocket.

When to Invest

If your technicians are struggling on tough tires, damaging wheels or sending tire work out, it could be time to invest in updating older or obsolete equipment.

An extremely busy tire shop that mounts 500 to 1,000 tires per month may get only a few years out of a tire changer. Most medium-volume tire shops outgrow their current tire changer in terms of capacity or capability before it truly wears out. Wheels and tires have grown in complexity, size, difficulty and fragility in the last 10 years. The machine that could handle everything 10 years ago likely no longer can, which makes a tire changer investment a requirement for any tire dealer.

Coats-Tire-Changer-Cut-Out-1400x700

Key Considerations

When investing in a new tire changer, shop owners, managers and technicians should ask themselves the following questions: 

  • What types of tires are we currently damaging or struggling to service?
  • What types of tires or wheels would we like to service in the future?
  • What is our current tire volume? 

Investing in a tire changer that will easily change all of the tire and wheel assemblies you’re servicing today—plus those you’ll see several years down the line—is very important. 

Another key consideration and an argument for investing in a current tire changer is shop labor costs. The need to have two techs on each tire job every time a car with a low profile or difficult tires comes in can be very expensive for a business to absorb over time. Having the proper equipment allows one technician to change tough or low-profile tires easily, keeping other techs in the shop productive and making money.

Available power sources in a shop is another consideration to take into account. For example, many shops don’t have 220v available but still require a powerful changer. For this customer, an air-powered changer might be the best option. Similarly, a mobile tire changing operation may not have electric available at all. For this type of operation, air-powered may be the only option.

If your shop is looking to invest in heavy-duty tire changers for truck, bus and agricultural tires, some equipment requires three-phase power, which sometimes is not available in shops and can limit a shop’s choices when considering a heavy-duty tire changer.

Content provided by Coats Garage. For more information, visit coatsgarage.com.

You May Also Like

Top Ten Ways To Make A Brake Job Harder

Brake jobs may not be difficult but care still needs to be taken. Here’s what often goes overlooked, even by pros.

Sometimes, rookies make mistakes (pros aren't exempt either). Here is our Top 10 list of common mistakes that can happen when replacing calipers, brake pads or rotors. It's a solid reminder to pay attention to the small stuff.

1. Not cleaning the brake slides and hardware: Just slapping new pads and abutment clips where the old ones once resided never works. The caliper bracket slides need to be clean and free from rust. Don’t get overly aggressive with the wire brush. Some automakers are using anti-corrosion coatings and surface treatment on the brake caliper bracket lands. If brake cleaner and a nylon brush can’t tackle the deposits, you might be making the corrosion worse by using a wire wheel or file.  

How It Works: A Look Inside The Scan Tool

We take look at the internal and external features that affect scan tool performance and durability.

What Can Cause ADAS Calibration Aborts?

Troubleshooting the problem comes down to knowing the common “hiccups” that can save you time and money.

Six Tips To Make Battery Diagnostics Better

Dead doesn’t always mean gone, especially under the hood. Here’s what to check when there’s no life in the battery.

How Accurate Is Your Click-Style Torque Wrench?

The inner construction of the click-style torque wrench makes it naturally susceptible to a loss of factory calibration.

Other Posts

Roger’s Tire Service Focuses On Customers And Community

Central Ohio Ag Tire Dealer grows business by serving farm customers from a barn.

CUV/SUV Tires Expected To Continue To Grow And Adapt

Replacement tires will follow OEM trends for fuel-efficiency and performance.

EV Adoption Means More Scrapped Tires, Says Coalition

Recycled Rubber Coalition estimates 12% more scrap tires from shift to EVs.

How Winter Tires Exemplify the Cost of Confidence

Tire professionals focus on why the product they’re selling is worth the investment.