Diagnosing Electronic Throttle Control Faults (VIDEO) -

Diagnosing Electronic Throttle Control Faults (VIDEO)

Because of the complexity of the system, faults can occur. This video is sponsored by The Group Training Academy.

Back in 1988, the BMW 7-Series put the first nail in the coffin of the mechanical throttle cable. By 1997, Chevrolet introduced its “throttle actuator control” (or TAC) on the new C5 Corvette.

Today, the old throttle cable is almost nothing more than a memory. Virtually every vehicle manufacturer has an electronic throttle system on every make and model.

Most throttle bodies have two wires that control the throttle body motor function, more similar in fact to the control of a power window motor than then old mechanical throttle cable. To drive the throttle blade open, power will be supplied on one wire while the other wire is supplied ground. In order to close the throttle blade, the polarities will be reversed.

However, your customers probably don’t know this – nor, really, do they need to. They count on you to make sure their car goes when it needs to.

The throttle body also incorporates the multiple Throttle Position Sensors. These are similar to the APP sensors in the way that multiple sensors are used for safety and each sensor operates independent of the other sensors.

When attempting to diagnose an Electronic Throttle Control fault, it is important the technician follow Diagnostic Trouble Codes carefully, always check Technical Service Bulletins and look for software updates. Many times, the DTC will be divided into three areas: APP, logic (PCM or wiring), or throttle body (TPS)

Electronic throttle control (ETC) has been responsible for improving fuel economy, reducing emissions, protecting powertrain components and providing a better overall driving experience.

Regardless of the vehicle, electronic throttle controls typically involve two different components: the accelerator pedal position sensor (APP) and the powertrain control module (PCM) that control the electronic throttle body.

In most applications, the APP replaces the throttle cable that connected the acclerator pedal and the throttle blade. Instead, the APP has two or more sensors that act as an input devide to the vehicle’s PCM or, in some cases, the ETC standalone module. In many cases, the APP incorporates a calibrated spring assembly so the driver has a familiar feel when pressing the accelerator pedal.

The throttle body does the actual work but because of the complexity of the system, faults can occur. These faults can be frustrating for the motorist, the service advisor and the technician because even if an intermittent fault happens for just an instant, it may result in a “limp-in” condition for the customer.

Some of the concerns customers with ETC system faults may have can include inoperative cruise control, vehicle stuck in limp-in mode or illuminated warning lights.

Here’s a caveat:  It is also important for your technician to remember that other areas of the vehicle’s control system may cause throttle-related problems that aren’t necessarily caused by the electronic throttle control system. Faults such as wheel speed sensors could affect throttle opening and should be diagnosed first. It’s a fact – electronic throttle bodies have high OE Failure rates. When the original fails it affects a vehicle’s power, fuel economy and drivability. Make sure you restore the your customer’s confidence and satisfaction by recommending with a high quality product that matches OE for fit, form and function like the ones offered by Standard.

This video is sponsored by The Group Training Academy.

You May Also Like

Not All Coolants Are Equal – Or Appropriate

Engines have diverse cooling needs. This video is part of the Group Training Academy.

It may be hard to believe, but antifreeze has been around long before the automobile. In the mid-19th century, it was used in dynamite.  Early engine designers tried other means of cooling before antifreeze gained a foothold.  It came to prominence during World War I when it was used in tanks and vehicles to prevent them from freezing in the battlefield.

Tool Time Podcast: SATA USA

Learn about spray gun technology in this episode from TechShop.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

How Important is Regenerative Braking For EVs?

Regenerative braking helps to increase the range of an EV by up to 20%.

Other Posts

Federated Upgrades Car Care Center Program

The program features new signage, marketing support and shop operations assistance.

The Future of MEMA with Bill Long

MEMA looks to the future as it celebrates 120 years making a big impact.

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

BEV Brake Service Tips

Andrew Markel shares EV service tips from the BendPak EV Garage.